Showing:

Annotations
Attributes
Diagrams
Instances
Properties
Source
Used by
Element OppositeParallelPlanesConstructionMethodType / BestFit
Annotations
 
The BestFit element describes the best-fit construction of an opposite parallel planes feature from 4 or more point-reducible base features. This element is in an optional choice.
Diagram
Diagram Features_xsd_Complex_Type_ConstructionMethodBaseType.tmp#ConstructionMethodBaseType_NominalsCalculated Features_xsd_Complex_Type_ConstructionMethodBaseType.tmp#ConstructionMethodBaseType Features_xsd_Complex_Type_OppositeParallelPlanesBestFitType.tmp#OppositeParallelPlanesBestFitType_n Features_xsd_Complex_Type_OppositeParallelPlanesBestFitType.tmp#OppositeParallelPlanesBestFitType_BaseFeature Features_xsd_Complex_Type_OppositeParallelPlanesBestFitType.tmp#OppositeParallelPlanesBestFitType
Type OppositeParallelPlanesBestFitType
Type hierarchy
Properties
content complex
Children BaseFeature, NominalsCalculated
Instance
 
<BestFit n="" xmlns="http://qifstandards.org/xsd/qif3">
  <NominalsCalculated>{0,1}</NominalsCalculated>
  <BaseFeature>{4,unbounded}</BaseFeature>
</BestFit>
Attributes
QName Type Use Annotation
n NaturalType required 
The required n attribute is the number of base features used in the construction.
Source
 
<xs:element name="BestFit" type="OppositeParallelPlanesBestFitType">
  <xs:annotation>
    <xs:documentation>The BestFit element describes the best-fit construction of an opposite parallel planes feature from 4 or more point-reducible base features. This element is in an optional choice.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Features.xsd
Element OppositeParallelPlanesConstructionMethodType / Recompensated
Annotations
 
The Recompensated element describes the re-compensated-for- probe-size best-fit construction of an opposite parallel planes feature from 4 or more base feature points. This element is in an optional choice.
Diagram
Diagram Features_xsd_Complex_Type_ConstructionMethodBaseType.tmp#ConstructionMethodBaseType_NominalsCalculated Features_xsd_Complex_Type_ConstructionMethodBaseType.tmp#ConstructionMethodBaseType Features_xsd_Complex_Type_OppositeParallelPlanesRecompType.tmp#OppositeParallelPlanesRecompType_BaseFeaturePointList Features_xsd_Complex_Type_OppositeParallelPlanesRecompType.tmp#OppositeParallelPlanesRecompType
Type OppositeParallelPlanesRecompType
Type hierarchy
Properties
content complex
Children BaseFeaturePointList, NominalsCalculated
Instance
 
<Recompensated xmlns="http://qifstandards.org/xsd/qif3">
  <NominalsCalculated>{0,1}</NominalsCalculated>
  <BaseFeaturePointList n="">{1,1}</BaseFeaturePointList>
</Recompensated>
Source
 
<xs:element name="Recompensated" type="OppositeParallelPlanesRecompType">
  <xs:annotation>
    <xs:documentation>The Recompensated element describes the re-compensated-for- probe-size best-fit construction of an opposite parallel planes feature from 4 or more base feature points. This element is in an optional choice.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Features.xsd
Element OppositeParallelPlanesConstructionMethodType / Copy
Annotations
 
The Copy element describes the construction of an opposite parallel planes feature by the copying of a base opposite parallel planes feature. This element is in an optional choice.
Diagram
Diagram Features_xsd_Complex_Type_ConstructionMethodBaseType.tmp#ConstructionMethodBaseType_NominalsCalculated Features_xsd_Complex_Type_ConstructionMethodBaseType.tmp#ConstructionMethodBaseType Features_xsd_Complex_Type_OppositeParallelPlanesCopyType.tmp#OppositeParallelPlanesCopyType_BaseOppositeParallelPlanes Features_xsd_Complex_Type_OppositeParallelPlanesCopyType.tmp#OppositeParallelPlanesCopyType
Type OppositeParallelPlanesCopyType
Type hierarchy
Properties
content complex
Children BaseOppositeParallelPlanes, NominalsCalculated
Instance
 
<Copy xmlns="http://qifstandards.org/xsd/qif3">
  <NominalsCalculated>{0,1}</NominalsCalculated>
  <BaseOppositeParallelPlanes>{1,1}</BaseOppositeParallelPlanes>
</Copy>
Source
 
<xs:element name="Copy" type="OppositeParallelPlanesCopyType">
  <xs:annotation>
    <xs:documentation>The Copy element describes the construction of an opposite parallel planes feature by the copying of a base opposite parallel planes feature. This element is in an optional choice.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Features.xsd
Element OppositeParallelPlanesConstructionMethodType / Cast
Annotations
 
The Cast element describes the construction of an opposite parallel planes feature by the casting of a base feature. This element is in an optional choice.
Diagram
Diagram Features_xsd_Complex_Type_ConstructionMethodBaseType.tmp#ConstructionMethodBaseType_NominalsCalculated Features_xsd_Complex_Type_ConstructionMethodBaseType.tmp#ConstructionMethodBaseType Features_xsd_Complex_Type_OppositeParallelPlanesCastType.tmp#OppositeParallelPlanesCastType_BaseFeature Features_xsd_Complex_Type_OppositeParallelPlanesCastType.tmp#OppositeParallelPlanesCastType
Type OppositeParallelPlanesCastType
Type hierarchy
Properties
content complex
Children BaseFeature, NominalsCalculated
Instance
 
<Cast xmlns="http://qifstandards.org/xsd/qif3">
  <NominalsCalculated>{0,1}</NominalsCalculated>
  <BaseFeature>{1,1}</BaseFeature>
</Cast>
Source
 
<xs:element name="Cast" type="OppositeParallelPlanesCastType">
  <xs:annotation>
    <xs:documentation>The Cast element describes the construction of an opposite parallel planes feature by the casting of a base feature. This element is in an optional choice.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Features.xsd
Element OppositeParallelPlanesConstructionMethodType / Transform
Annotations
 
The Transform element describes the construction of an opposite parallel planes feature by the transformation of a base opposite parallel planes feature. This element is in an optional choice.
Diagram
Diagram Features_xsd_Complex_Type_ConstructionMethodBaseType.tmp#ConstructionMethodBaseType_NominalsCalculated Features_xsd_Complex_Type_ConstructionMethodBaseType.tmp#ConstructionMethodBaseType Features_xsd_Complex_Type_OppositeParallelPlanesTransformType.tmp#OppositeParallelPlanesTransformType_BaseOppositeParallelPlanes Features_xsd_Complex_Type_OppositeParallelPlanesTransformType.tmp#OppositeParallelPlanesTransformType_Transformation Features_xsd_Complex_Type_OppositeParallelPlanesTransformType.tmp#OppositeParallelPlanesTransformType
Type OppositeParallelPlanesTransformType
Type hierarchy
Properties
content complex
Children BaseOppositeParallelPlanes, NominalsCalculated, Transformation
Instance
 
<Transform xmlns="http://qifstandards.org/xsd/qif3">
  <NominalsCalculated>{0,1}</NominalsCalculated>
  <BaseOppositeParallelPlanes>{1,1}</BaseOppositeParallelPlanes>
  <Transformation>{1,1}</Transformation>
</Transform>
Source
 
<xs:element name="Transform" type="OppositeParallelPlanesTransformType">
  <xs:annotation>
    <xs:documentation>The Transform element describes the construction of an opposite parallel planes feature by the transformation of a base opposite parallel planes feature. This element is in an optional choice.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Features.xsd
Element OppositeParallelPlanesConstructionMethodType / FromScan
Annotations
 
The FromScan element describes the construction of an opposite parallel planes feature from scan data. This element is in an optional choice.
Diagram
Diagram Features_xsd_Complex_Type_ConstructionMethodBaseType.tmp#ConstructionMethodBaseType_NominalsCalculated Features_xsd_Complex_Type_ConstructionMethodBaseType.tmp#ConstructionMethodBaseType Features_xsd_Complex_Type_OppositeParallelPlanesFromScanType.tmp#OppositeParallelPlanesFromScanType_SurfaceFeature Features_xsd_Complex_Type_OppositeParallelPlanesFromScanType.tmp#OppositeParallelPlanesFromScanType_SearchRadius Features_xsd_Complex_Type_OppositeParallelPlanesFromScanType.tmp#OppositeParallelPlanesFromScanType
Type OppositeParallelPlanesFromScanType
Type hierarchy
Properties
content complex
Children NominalsCalculated, SearchRadius, SurfaceFeature
Instance
 
<FromScan xmlns="http://qifstandards.org/xsd/qif3">
  <NominalsCalculated>{0,1}</NominalsCalculated>
  <SurfaceFeature>{1,1}</SurfaceFeature>
  <SearchRadius decimalPlaces="" linearUnit="" significantFigures="">{1,1}</SearchRadius>
</FromScan>
Source
 
<xs:element name="FromScan" type="OppositeParallelPlanesFromScanType">
  <xs:annotation>
    <xs:documentation>The FromScan element describes the construction of an opposite parallel planes feature from scan data. This element is in an optional choice.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Features.xsd
Complex Type OppositeParallelPlanesConstructionMethodType
Annotations
 
The OppositeParallelPlanesConstructionMethodType defines the method for constructing a unique nominal or measured opposite parallel planes feature.
Diagram
Diagram Features_xsd_Complex_Type_OppositeParallelPlanesConstructionMethodType.tmp#OppositeParallelPlanesConstructionMethodType_BestFit Features_xsd_Complex_Type_OppositeParallelPlanesConstructionMethodType.tmp#OppositeParallelPlanesConstructionMethodType_Recompensated Features_xsd_Complex_Type_OppositeParallelPlanesConstructionMethodType.tmp#OppositeParallelPlanesConstructionMethodType_Copy Features_xsd_Complex_Type_OppositeParallelPlanesConstructionMethodType.tmp#OppositeParallelPlanesConstructionMethodType_Cast Features_xsd_Complex_Type_OppositeParallelPlanesConstructionMethodType.tmp#OppositeParallelPlanesConstructionMethodType_Transform Features_xsd_Complex_Type_OppositeParallelPlanesConstructionMethodType.tmp#OppositeParallelPlanesConstructionMethodType_FromScan
Used by
Children BestFit, Cast, Copy, FromScan, Recompensated, Transform
Source
 
<xs:complexType name="OppositeParallelPlanesConstructionMethodType">
  <xs:annotation>
    <xs:documentation>The OppositeParallelPlanesConstructionMethodType defines the method for constructing a unique nominal or measured opposite parallel planes feature.</xs:documentation>
  </xs:annotation>
  <xs:choice minOccurs="0">
    <xs:annotation>
      <xs:documentation>This optional compositor provides a choice of the construction method for the opposite parallel planes feature.</xs:documentation>
    </xs:annotation>
    <xs:element name="BestFit" type="OppositeParallelPlanesBestFitType">
      <xs:annotation>
        <xs:documentation>The BestFit element describes the best-fit construction of an opposite parallel planes feature from 4 or more point-reducible base features. This element is in an optional choice.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="Recompensated" type="OppositeParallelPlanesRecompType">
      <xs:annotation>
        <xs:documentation>The Recompensated element describes the re-compensated-for- probe-size best-fit construction of an opposite parallel planes feature from 4 or more base feature points. This element is in an optional choice.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="Copy" type="OppositeParallelPlanesCopyType">
      <xs:annotation>
        <xs:documentation>The Copy element describes the construction of an opposite parallel planes feature by the copying of a base opposite parallel planes feature. This element is in an optional choice.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="Cast" type="OppositeParallelPlanesCastType">
      <xs:annotation>
        <xs:documentation>The Cast element describes the construction of an opposite parallel planes feature by the casting of a base feature. This element is in an optional choice.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="Transform" type="OppositeParallelPlanesTransformType">
      <xs:annotation>
        <xs:documentation>The Transform element describes the construction of an opposite parallel planes feature by the transformation of a base opposite parallel planes feature. This element is in an optional choice.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="FromScan" type="OppositeParallelPlanesFromScanType">
      <xs:annotation>
        <xs:documentation>The FromScan element describes the construction of an opposite parallel planes feature from scan data. This element is in an optional choice.</xs:documentation>
      </xs:annotation>
    </xs:element>
  </xs:choice>
</xs:complexType>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Features.xsd
XML Schema documentation generated by ® XML Editor.