Showing:

Annotations
Diagrams
Properties
Source
Used by
Element ValidationCountsType / ExternalQIFReferencesCount
Annotations
 
The optional ExternalQIFReferencesCount element is the number of external QIF references in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="ExternalQIFReferencesCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional ExternalQIFReferencesCount element is the number of external QIF references in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / DatumDefinitionsCount
Annotations
 
The optional DatumDefinitionsCount element is the number of datum definitions in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="DatumDefinitionsCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional DatumDefinitionsCount element is the number of datum definitions in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / DatumTargetDefinitionsCount
Annotations
 
The optional DatumTargetDefinitionsCount element is the number of datum target definitions in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="DatumTargetDefinitionsCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional DatumTargetDefinitionsCount element is the number of datum target definitions in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / TransformsCount
Annotations
 
The optional TransformsCount element is the number of transforms in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="TransformsCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional TransformsCount element is the number of transforms in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / CoordinateSystemsCount
Annotations
 
The optional CoordinateSystemsCount element is the number of coordinate systems in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="CoordinateSystemsCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional CoordinateSystemsCount element is the number of coordinate systems in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / DatumReferenceFramesCount
Annotations
 
The optional DatumReferenceFramesCount element is the number of datum reference frames in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="DatumReferenceFramesCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional DatumReferenceFramesCount element is the number of datum reference frames in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / MeasurementResourcesCount
Annotations
 
The optional MeasurementResourcesCount element is the number of measurement resources in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="MeasurementResourcesCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional MeasurementResourcesCount element is the number of measurement resources in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / ThreadSpecificationsCount
Annotations
 
The optional ThreadSpecificationsCount element is the number of thread specifications in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="ThreadSpecificationsCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional ThreadSpecificationsCount element is the number of thread specifications in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / ProductGeometrySetCount
Annotations
 
The optional ProductGeometrySetCount element is the number of geometric entities present in the CAD scene.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="ProductGeometrySetCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional ProductGeometrySetCount element is the number of geometric entities present in the CAD scene.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / ProductTopologySetCount
Annotations
 
The optional ProductTopologySetCount element is the number of topological entities in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="ProductTopologySetCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional ProductTopologySetCount element is the number of topological entities in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / ProductNoteSetCount
Annotations
 
The optional ProductNoteSetCount element is the number of notes in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="ProductNoteSetCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional ProductNoteSetCount element is the number of notes in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / ProductNoteFlagSetCount
Annotations
 
The optional ProductNoteFlagSetCount element is the number of flag notes present in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="ProductNoteFlagSetCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional ProductNoteFlagSetCount element is the number of flag notes present in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / ProductPartNoteSetCount
Annotations
 
The optional ProductPartNoteSetCount element is the number of part notes and standard notes in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="ProductPartNoteSetCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional ProductPartNoteSetCount element is the number of part notes and standard notes in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / ProductViewSetCount
Annotations
 
The optional ProductViewSetCount element is the number of views in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="ProductViewSetCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional ProductViewSetCount element is the number of views in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / ProductLayerSetCount
Annotations
 
The optional ProductLayerSetCount element is the number of model layers.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="ProductLayerSetCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional ProductLayerSetCount element is the number of model layers.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / ProductCoordinateSystemSetCount
Annotations
 
The optional ProductCoordinateSystemSetCount element is the number of coordinate systems in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="ProductCoordinateSystemSetCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional ProductCoordinateSystemSetCount element is the number of coordinate systems in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / ProductVisualizationSetCount
Annotations
 
The optional ProductVisualizationSetCount element is the number of display information objects associated with PMI entities in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="ProductVisualizationSetCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional ProductVisualizationSetCount element is the number of display information objects associated with PMI entities in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / ProductAuxiliarySetCount
Annotations
 
The optional ProductAuxiliarySetCount element is the number of auxiliary objects present in the CAD scene.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="ProductAuxiliarySetCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional ProductAuxiliarySetCount element is the number of auxiliary objects present in the CAD scene.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / ProductPartSetCount
Annotations
 
The optional ProductPartSetCount element is the number of parts in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="ProductPartSetCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional ProductPartSetCount element is the number of parts in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / ProductAssemblySetCount
Annotations
 
The optional ProductAssemblySetCount element is the number of assemblies in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="ProductAssemblySetCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional ProductAssemblySetCount element is the number of assemblies in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / ProductComponentSetCount
Annotations
 
The optional ProductComponentSetCount element is the number of components in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="ProductComponentSetCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional ProductComponentSetCount element is the number of components in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / ProductAsmPathsCount
Annotations
 
The optional ProductAsmPathsCount element is the number of asm paths present in the CAD scene.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="ProductAsmPathsCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional ProductAsmPathsCount element is the number of asm paths present in the CAD scene.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / FeatureDefinitionsCount
Annotations
 
The optional FeatureDefinitionsCount element is the number of inspection feature definitions in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="FeatureDefinitionsCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional FeatureDefinitionsCount element is the number of inspection feature definitions in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / FeatureNominalsCount
Annotations
 
The optional FeatureNominalsCount element is the number of nominal inspection features.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="FeatureNominalsCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional FeatureNominalsCount element is the number of nominal inspection features.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / FeatureItemsCount
Annotations
 
The optional FeatureItemsCount element is the number of inspection features items in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="FeatureItemsCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional FeatureItemsCount element is the number of inspection features items in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / CharacteristicDefinitionsCount
Annotations
 
The optional CharacteristicDefinitionsCount element is the number of characteristic definitions in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="CharacteristicDefinitionsCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional CharacteristicDefinitionsCount element is the number of characteristic definitions in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / DefaultCharacteristicDefinitionsCount
Annotations
 
The optional DefaultCharacteristicDefinitionsCount element is the number of default or "unless otherwise specified" characteristic definitions in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="DefaultCharacteristicDefinitionsCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional DefaultCharacteristicDefinitionsCount element is the number of default or "unless otherwise specified" characteristic definitions in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / DefaultToleranceDefinitionsCount
Annotations
 
The optional DefaultToleranceDefinitionsCount element is the number of default or "unless otherwise specified" tolerance definitions which allow a tolerance definition to be shared among characteristic definitions of different types.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="DefaultToleranceDefinitionsCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional DefaultToleranceDefinitionsCount element is the number of default or "unless otherwise specified" tolerance definitions which allow a tolerance definition to be shared among characteristic definitions of different types.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / CharacteristicNominalsCount
Annotations
 
The optional CharacteristicNominalsCount element is the number of characteristic nominals in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="CharacteristicNominalsCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional CharacteristicNominalsCount element is the number of characteristic nominals in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / CharacteristicItemsCount
Annotations
 
The optional CharacteristicItemsCount element is the number of characteristic items in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="CharacteristicItemsCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional CharacteristicItemsCount element is the number of characteristic items in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / CharacteristicGroupsCount
Annotations
 
The optional CharacteristicGroupsCount element is the number of characteristic groups in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="CharacteristicGroupsCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional CharacteristicGroupsCount element is the number of characteristic groups in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / WeldSymbolSetCount
Annotations
 
The optional WeldSymbolSetCount element is the number of Weld Symbols in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="WeldSymbolSetCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional WeldSymbolSetCount element is the number of Weld Symbols in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / MeasurementsPlanPresent
Annotations
 
The optional MeasurementsPlanPresent element is a boolean indicating whether a measurement plan is present in the QIF document.
Diagram
Diagram
Type xs:boolean
Properties
content simple
minOccurs 0
Source
 
<xs:element name="MeasurementsPlanPresent" type="xs:boolean" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional MeasurementsPlanPresent element is a boolean indicating whether a measurement plan is present in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / MeasurementsResultsCount
Annotations
 
The optional MeasurementsResultsCount element is the number of measurement results in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="MeasurementsResultsCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional MeasurementsResultsCount element is the number of measurement results in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / StatisticalStudyPlansCount
Annotations
 
The optional StatisticalStudyPlansCount element is the number of statistical study plans in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="StatisticalStudyPlansCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional StatisticalStudyPlansCount element is the number of statistical study plans in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / StatisticalStudiesResultsCount
Annotations
 
The optional StatisticalStudiesResultsCount element is the number of statistical studies results in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="StatisticalStudiesResultsCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional StatisticalStudiesResultsCount element is the number of statistical studies results in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / CorrectiveActionPlansCount
Annotations
 
The optional CorrectiveActionPlansCount element is the number of corrective action plans in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="CorrectiveActionPlansCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional CorrectiveActionPlansCount element is the number of corrective action plans in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / ManufacturingProcessTraceabilitiesCount
Annotations
 
The optional ManufacturingProcessTraceabilitiesCount element is the number of manufacturing process traceabilities in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="ManufacturingProcessTraceabilitiesCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional ManufacturingProcessTraceabilitiesCount element is the number of manufacturing process traceabilities in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / FeatureRulesCount
Annotations
 
The optional FeatureRulesCount element is the number of feature rules in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="FeatureRulesCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional FeatureRulesCount element is the number of feature rules in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / DMESelectionRulesCount
Annotations
 
The optional DMESelectionRulesCount element is the number of DME selection rules in the QIF document.
Diagram
Diagram
Type xs:unsignedInt
Properties
content simple
minOccurs 0
Source
 
<xs:element name="DMESelectionRulesCount" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional DMESelectionRulesCount element is the number of DME selection rules in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Element ValidationCountsType / SignaturePresent
Annotations
 
The optional SignaturePresent element is a boolean indicating whether a digital signature is present in the QIF document.
Diagram
Diagram
Type xs:boolean
Properties
content simple
minOccurs 0
Source
 
<xs:element name="SignaturePresent" type="xs:boolean" minOccurs="0">
  <xs:annotation>
    <xs:documentation>The optional SignaturePresent element is a boolean indicating whether a digital signature is present in the QIF document.</xs:documentation>
  </xs:annotation>
</xs:element>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
Complex Type ValidationCountsType
Annotations
 
The ValidationCountsType contains redundancy checks in the form of counts of items in the significant lists contained within a QIF document.
Diagram
Diagram Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_ExternalQIFReferencesCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_DatumDefinitionsCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_DatumTargetDefinitionsCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_TransformsCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_CoordinateSystemsCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_DatumReferenceFramesCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_MeasurementResourcesCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_ThreadSpecificationsCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_ProductGeometrySetCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_ProductTopologySetCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_ProductNoteSetCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_ProductNoteFlagSetCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_ProductPartNoteSetCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_ProductViewSetCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_ProductLayerSetCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_ProductCoordinateSystemSetCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_ProductVisualizationSetCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_ProductAuxiliarySetCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_ProductPartSetCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_ProductAssemblySetCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_ProductComponentSetCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_ProductAsmPathsCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_FeatureDefinitionsCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_FeatureNominalsCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_FeatureItemsCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_CharacteristicDefinitionsCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_DefaultCharacteristicDefinitionsCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_DefaultToleranceDefinitionsCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_CharacteristicNominalsCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_CharacteristicItemsCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_CharacteristicGroupsCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_WeldSymbolSetCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_MeasurementsPlanPresent Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_MeasurementsResultsCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_StatisticalStudyPlansCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_StatisticalStudiesResultsCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_CorrectiveActionPlansCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_ManufacturingProcessTraceabilitiesCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_FeatureRulesCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_DMESelectionRulesCount Traceability_xsd_Complex_Type_ValidationCountsType.tmp#ValidationCountsType_SignaturePresent
Used by
Children CharacteristicDefinitionsCount, CharacteristicGroupsCount, CharacteristicItemsCount, CharacteristicNominalsCount, CoordinateSystemsCount, CorrectiveActionPlansCount, DMESelectionRulesCount, DatumDefinitionsCount, DatumReferenceFramesCount, DatumTargetDefinitionsCount, DefaultCharacteristicDefinitionsCount, DefaultToleranceDefinitionsCount, ExternalQIFReferencesCount, FeatureDefinitionsCount, FeatureItemsCount, FeatureNominalsCount, FeatureRulesCount, ManufacturingProcessTraceabilitiesCount, MeasurementResourcesCount, MeasurementsPlanPresent, MeasurementsResultsCount, ProductAsmPathsCount, ProductAssemblySetCount, ProductAuxiliarySetCount, ProductComponentSetCount, ProductCoordinateSystemSetCount, ProductGeometrySetCount, ProductLayerSetCount, ProductNoteFlagSetCount, ProductNoteSetCount, ProductPartNoteSetCount, ProductPartSetCount, ProductTopologySetCount, ProductViewSetCount, ProductVisualizationSetCount, SignaturePresent, StatisticalStudiesResultsCount, StatisticalStudyPlansCount, ThreadSpecificationsCount, TransformsCount, WeldSymbolSetCount
Source
 
<xs:complexType name="ValidationCountsType">
  <xs:annotation>
    <xs:documentation>The ValidationCountsType contains redundancy checks in the form of counts of items in the significant lists contained within a QIF document.</xs:documentation>
  </xs:annotation>
  <xs:sequence>
    <xs:element name="ExternalQIFReferencesCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional ExternalQIFReferencesCount element is the number of external QIF references in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="DatumDefinitionsCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional DatumDefinitionsCount element is the number of datum definitions in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="DatumTargetDefinitionsCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional DatumTargetDefinitionsCount element is the number of datum target definitions in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="TransformsCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional TransformsCount element is the number of transforms in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="CoordinateSystemsCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional CoordinateSystemsCount element is the number of coordinate systems in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="DatumReferenceFramesCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional DatumReferenceFramesCount element is the number of datum reference frames in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="MeasurementResourcesCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional MeasurementResourcesCount element is the number of measurement resources in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="ThreadSpecificationsCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional ThreadSpecificationsCount element is the number of thread specifications in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="ProductGeometrySetCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional ProductGeometrySetCount element is the number of geometric entities present in the CAD scene.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="ProductTopologySetCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional ProductTopologySetCount element is the number of topological entities in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="ProductNoteSetCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional ProductNoteSetCount element is the number of notes in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="ProductNoteFlagSetCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional ProductNoteFlagSetCount element is the number of flag notes present in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="ProductPartNoteSetCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional ProductPartNoteSetCount element is the number of part notes and standard notes in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="ProductViewSetCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional ProductViewSetCount element is the number of views in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="ProductLayerSetCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional ProductLayerSetCount element is the number of model layers.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="ProductCoordinateSystemSetCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional ProductCoordinateSystemSetCount element is the number of coordinate systems in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="ProductVisualizationSetCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional ProductVisualizationSetCount element is the number of display information objects associated with PMI entities in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="ProductAuxiliarySetCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional ProductAuxiliarySetCount element is the number of auxiliary objects present in the CAD scene.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="ProductPartSetCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional ProductPartSetCount element is the number of parts in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="ProductAssemblySetCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional ProductAssemblySetCount element is the number of assemblies in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="ProductComponentSetCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional ProductComponentSetCount element is the number of components in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="ProductAsmPathsCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional ProductAsmPathsCount element is the number of asm paths present in the CAD scene.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="FeatureDefinitionsCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional FeatureDefinitionsCount element is the number of inspection feature definitions in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="FeatureNominalsCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional FeatureNominalsCount element is the number of nominal inspection features.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="FeatureItemsCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional FeatureItemsCount element is the number of inspection features items in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="CharacteristicDefinitionsCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional CharacteristicDefinitionsCount element is the number of characteristic definitions in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="DefaultCharacteristicDefinitionsCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional DefaultCharacteristicDefinitionsCount element is the number of default or "unless otherwise specified" characteristic definitions in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="DefaultToleranceDefinitionsCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional DefaultToleranceDefinitionsCount element is the number of default or "unless otherwise specified" tolerance definitions which allow a tolerance definition to be shared among characteristic definitions of different types.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="CharacteristicNominalsCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional CharacteristicNominalsCount element is the number of characteristic nominals in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="CharacteristicItemsCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional CharacteristicItemsCount element is the number of characteristic items in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="CharacteristicGroupsCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional CharacteristicGroupsCount element is the number of characteristic groups in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="WeldSymbolSetCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional WeldSymbolSetCount element is the number of Weld Symbols in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="MeasurementsPlanPresent" type="xs:boolean" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional MeasurementsPlanPresent element is a boolean indicating whether a measurement plan is present in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="MeasurementsResultsCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional MeasurementsResultsCount element is the number of measurement results in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="StatisticalStudyPlansCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional StatisticalStudyPlansCount element is the number of statistical study plans in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="StatisticalStudiesResultsCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional StatisticalStudiesResultsCount element is the number of statistical studies results in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="CorrectiveActionPlansCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional CorrectiveActionPlansCount element is the number of corrective action plans in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="ManufacturingProcessTraceabilitiesCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional ManufacturingProcessTraceabilitiesCount element is the number of manufacturing process traceabilities in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="FeatureRulesCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional FeatureRulesCount element is the number of feature rules in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="DMESelectionRulesCount" type="xs:unsignedInt" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional DMESelectionRulesCount element is the number of DME selection rules in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
    <xs:element name="SignaturePresent" type="xs:boolean" minOccurs="0">
      <xs:annotation>
        <xs:documentation>The optional SignaturePresent element is a boolean indicating whether a digital signature is present in the QIF document.</xs:documentation>
      </xs:annotation>
    </xs:element>
  </xs:sequence>
</xs:complexType>
Schema location file:////Q:/kramer/qif3.0/model/QIFforHTMLxsd/QIFLibrary/Traceability.xsd
XML Schema documentation generated by ® XML Editor.